Epoxy coating aluminum foil coil for marine
| Payment Type: | L/C,T/T,Western Union |
|---|---|
| Terms of Trade: | FOB,CFR,CIF,EXW |
| Min. Order: | 5 Metric Ton |
| Delivery Time: | 30 Days |
| Packaging: | Standard export package |
|---|---|
| Productivity: | 100000tons per month |
| Brand: | Trumony |
| Transportation: | Ocean,Land,Air |
| Place of Origin: | China |
| Supply Ability: | 1200000 tons per year |
| Certificate: | ISO 9001 |
| HS Code: | 7606 |
| Port: | Shanghai |
Basic Info
Model No.: TR-J106
Product Description
Product Name: Epoxy coating aluminum foil coil for marine
Company Introduction:
Trumony Alumnum Co.LTD build from 2006, have export over 53 countries of worldwide. Our main products are aluminum alloy cladding material, cole material and other aluminum products like aluminum coil, aluminum hydrophilic foil, aluminum strip, aluminum pipe, aluminum tube etc, for automobile heat exchangers such as radiator, intercooler, condenser, evaporator and industrial heat exchangers, like electricity power radiator, air conditioner etc.There are complete sets of modern production and testing equipment operation workshops for casting, hot rolling, cold rolling, finishing and advanced check-out for researching and testing,such as WDW-3010- micro-controlled electronic universal testing machine,CALS-2000 aluminum alloy metallographic image analysis system etc.
Mechanical property:
| Alloy code | Temper | Tensile Strength Rm(Mpa) | Yield Strength Rp0.2(Mpa) | Elongation |
| TR010,TR020,TR030,TR040,TR050,TR110,TR310, TR116,TR316,TR111, TR313,TR121,TR131, TR141,TR150,TR151,TR156 etc | O | 95~135* | ≥35* | ≥15* |
| H14 | 140~185 | ≥125 | ≥1.5 | |
| H24 | 140~185 | ≥125 | ≥3 | |
| H16 | 185~225 | ≥160 | ≥1 | |
| H18 | ≥185 | - | ≥0.5 | |
| TR166 etc tube material | H24 | 185~235 | ≥150 | ≥8 |
| TR116,TR316 etc tube material | H14 | 140~185 | ≥125 | ≥3 |
| H24 | 140~185 | ≥125 | ≥8 |
Color: Blue, red, white, black, yellow, green, golden etc
Alloy code: 1000 series, 2000 series, 3000 series, 4000 series, 5000 series, 6000 series, 8000 series
Thickness: 0.06-0.2 mm, or 6 micron-20 micron
Width: 200-1550mm or customrized
Application:packaging, laminating, food container, pharmaceutical, blister etc
Description and advange of Epoxy coating aluminum foil coil for marine:
Hydrophilic foil is the main raw material of heat exchanger in air conditioner. It is widely used in household air conditioner, refrigerator, automobile air conditioner and other refrigeration equipment. Compared with ordinary light foil, it has the following advantages:
1, can increase the anti-corrosion, anti-mold, no odor function;
2. The condensed water on the accumulated surface of the heat exchanger is evenly distributed on the surface, which will not cause the aggregation and blockage of the heat exchanger after the formation of water droplets and affect the heat exchange conditions, thus increasing the heat exchange rate by 5%;
3. Since there are no beads in the water, the noise caused by vibration is correspondingly reduced;
4, can prevent the air conditioner oxidized powder blowing into the room to produce adverse effects on the human body, in line with environmental requirements;
5. The hydrophilic aluminum foil for air conditioner heat sink shall comply with YS/T95.2-- 2001
6. The anticorrosion performance of epoxy is better than that of hydrophilic, and our current standard is that epoxy can be acidic
500 hours fog, grade 8 and above, hydrophilic can achieve 500 hours of neutral salt fog test, grade 9.5 and
The above
7. Epoxy can be applied to special environments, such as PH 3 environment, such as Marine, fermentation engineering,
Industrial vegetable greenhouses and so on, and hydrophilic can only be applied to the neutral environment.
Trumony Aluminum Limited
Trumony Aluminum Limited was established in 2006 and mass production began in Jan. 2007. With ISO 9001:2000 and ISO/TS16949:2002 certificated, we are one of the global leading and most specialized suppliers of heat exchanger materials for automobile, HVAC and industrial cooling tower. With the development of the new energy car industry.Trumony dedicated to provide different solution to the BTMS battery thermal management system.We can provide different types of water cooling plate.Such as brazing type,extruded type.roll bond plate type water cooling plate. Custom development or manufacturing is also available to offer.
Bring technology to the ground by material innovation and development,we are always on the road.
Company Info
- Company Name: Trumony Aluminum Limited
- Representative: Li Li
- Product/Service: Aluminum Pipe , Aluminum Coil , Aluminum Sheet , Aluminum Tube , Aluminum Plate , Aluminum Strip
- Capital (Million US $): 30 Millions RMB
- Year Established: 2006
- Total Annual Sales Volume (Million US $): Above US$100 Million
- Export Percentage: 31% - 40%
- Total Annual Purchase Volume (Million US $): Above US$100 Million
- No. of Production Lines: 4
- No. of R&D Staff: 5 -10 People
- No. of QC Staff: 11 -20 People
- OEM Services Provided: yes
- Factory Size (Sq.meters): 10,000-30,000 square meters
- Factory Location: Jiangsu Province, China
- Contact Person: Ms. Tracy
- Tel: 86-512-62532616
Premium Related Products
Other Products
