Polyken980-20 4" x 50 ft Cold Applied Wrap Tape

Wrap the Anti-Corrosion Adhesive Tape under slight tension with 50% overlap (first layer),in doing so remove release layer. Overlap beginning and end of wrapping to themselves and minimum 50mm on the factory coating. Overlap the first wrapping of a new roll when attached and also include the end piece of the previous roll.
As outer layer apply a further wrapping on top under slight tension. The class C/50 is reached with minimum overlap of 50% (all together 4 layers) and the class B/50 with an overlap of about 10mm (all together 3 layers). The outer wrapping should cover the inner one of about minimum 10 mm at both ends.
Anti-Corrosion Adhesive Tape includingPolyekn980 Wrap Tape,Inner Wrap Tape,Polyken Adhesive Tape,Cold Wrap Tape.

Backing :  Special blend of stabilized polyethylene

Adhesive : Butyl rubber and Adhesion Promoting Resins

Total tape thickness in mils:15mils(0.381mm),20mils(0.508mm),25mils(0.635mm),30mils(0.762mm)

Tape width in inches:2"(50mm),4"(100mm),6"(150mm),9"(228mm),12"(305mm)18" (457mm)

Tape roll length in feet:100ft(30M),200ft(61M),400ft(122M),600ft(183M),800ft(244M)

 Aluminum Foil Tape,Visco-elactic Wrap Tape,Inner Wrap Tape

If you have any questions pls contact me: