heat shrinkable sleeves for underground pipe
Product Description
heat shrinkable sleeves for underground pipe
1 System description:
The XUNDAT 800 is a hand wrapped heat shrinkable tape designed for corrosion protection of straight pipes, fittings, bends, elbows and other irregular configurations.. When heated the backing layer shrinks and the Adhesive flows and forms a reliable corrosion protection seal onto metal and adjacent coating surfaces.
The Polyethylene Heat shrinkable Tape needs no primer nor patch closure and reduces application time and labour costs.
2 Structure
The specification of the tape consists of three layers,
Adhesive: butyl rubber based hot melt adhesive
Film backing: polyethylene
Interleaf:Antiadhesive Film Treated with Silicone
3 Features
After heating, formed corrosion protection seal
Strong backing provides outstanding waterproofing effect
High chemical resistance. resists impact, abrasion and ultraviolet light.
Excellent resistance against cathodic disbondment, dielectric breakdown.
Simple Application
4 Physical Properties
· Product Data Sheet Total Thickness:40mil, 50 mil,60 mil ,65 mils.
· Width:50,100,150,300,400,500,800 mm
· Length: 10 m
· Tensile Strength:35 N/cm
· Elongation:400%
· Adhesion Strength to pipe:30 N/cm
· Application temperature: -10 -60 °C
· Temperature resistance:-50 °C - 80°C
· Shelf Life: 12 months
5 Application
No Special skills, equipments, patch closure nor primer are needed. Its superior flexibility provides easy and reliable application for irregular configurations of fittings, bends and elbows and small diameter of straight pipes.
Wrap spirally the tape over foreign matters-free and preheated surface, beginning at least 25~50mm (1~2 ) onto pipe coating. Wrap the tape with enough tension to obtain conformability and with minimum 50% of overlapping, while removing the release liner. Warm the end part of the tape and press down firmly. Using a torch, start at the edge of the tape and heat circumferentially around the coated pipe.
Finish off by heating over the entire tape vertically to ensure a uniform adhesion and by using a roller or gloved hands to rem
ove wrinkle and air.
Jining Xunda Pipe Coating Material Co., Ltd. is the largest manufacturer of anticorrosion coating materials in China.
We are a global company supplying Polyethylene Coating Systems for anti-corrosion in the oil, gas and water pipeline construction industry for both onshore and offshore applications.
We are a manufacturer of standard and special products. With high-quality anti-corrosion systems, we are providing anti-corrosion solutions for oil pipelines, natural gas, chemicals and water transmission and distribution pipelines. We are a global supplier of PE corrosion systems for metallic pipelines.
We serve:
Oil, gas and water transmission pipeline markets
Oil and gas distribution and utility markets
New pipeline construction markets
Rehabilitation and reconditioning markets
Offshore industry
Refinery and petrochemical plant industry
We manufacture polyethylene coating by utilizing butyl based elastomeric adhesives, Polyethylene films and liquid adhesives for Corrosion Protection of steel pipes.
Our company provides corrosion protection with the inherent chemicals of polyethylene and butyl adhesive for water resistance and oxygen penetration. Oxygen and Water are prevented from reaching the metal substrate. They are the necessary and sufficient conditions for corrosion.
Want to know more details, please contact us:
Contact :Nancy Song
Skype:nancysong7
0086 13791713064 (WHATSAPP)
QQ:2934034518
Contact us if you need more details on Heat Shrinkable Sleeves. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Wrapping Materials for Underground Pipe、Pipe Heat Shrink Sleeve. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Heat Shrinkable Pipe Coating > Heat Shrinkable Sleeve
Premium Related Products