heat shrink sleeve polyethylene anticorrosion pipe wrap tape
Product Description
Heat Shrink Sleeve polyethylene anticorrosion Pipe Wrap Tape
The XUNDA-T HSS is a hand wrapped heat shrinkable tape designed for corrosion protection of straight pipes, fittings,
bends,
elbows and other irregular configurations.. When heated the backing layer shrinks and the Adhesive flows and forms
a reliable corrosion protection seal onto metal and adjacent coating surfaces.
The Polyethylene Heat shrinkable Tape needs no primer nor patch closure and reduces application time and labour costs.
The specification of the tape consists of three layers,
Adhesive: butyl rubber based hot melt adhesive
Film backing: polyethylene
Interleaf:Antiadhesive Film Treated with Silicone
After heating, formed corrosion protection seal
Strong backing provides outstanding waterproofing effect
High chemical resistance. resists impact, abrasion and ultraviolet light.
Excellent resistance against cathodic disbondment, dielectric breakdown.
Simple Application
Backing | ||
Property | Typical Value | Test Method |
Tensile Strength | 20MPa(2900 psi) | ASTM D-638 |
Elongation at Break | 550% | ASTM D-638 |
Specific Gravity | 0.95 | ASTM D-792 |
Hardness, Shore D | 48 | ASTM D-2240 |
Dielectric Strength | 20 kv/mm | ASTM D-149 |
Water Absorption | 0.05% | ASTM D-570 |
Shrink Force | 240KPA(35 psi) | ASTM D-638 |
Volume Resistivity | 1.0 x 1016 ohm.cm | ASTM D-257 |
Adhesive | ||
Property | Typical Value | Test Method |
Softening Point | 85℃ | ASTM E-28 |
Lap Shear | 40 psi | ASTM D-1002 |
Property | Typical Value | Test Method |
Peel to Steel | 35N/cm | ASTM D-4541 |
Low Temperature Flexibility | -20℃ | ASTM D-2671 |
Cathodic Disbondment | 10mm radius | ASTM G8,30days,@23℃ |
Impact Resistance | Pass | DIN EN 12068 |
Indentation Resistance | Pass | DIN EN 12068 |
Dielectric Breakdown | 35kv | ASTM D-149 |
Tape Thickness | 2.0mm,2.2mm,2.5mm,2.9mm or others | |
Tape Width | 450mm,600mm,900mm or others |
No Special skills, equipments, patch closure nor primer are needed. Its superior flexibility provides easy
and reliable application for irregular configurations of fittings, bends and elbows and small diameter of straight pipes.
Wrap spirally the tape over foreign matters-free and preheated surface, beginning at least 25~50mm (1~2 ) onto pipe coating. Wrap the tape with enough tension
to obtain conformability and with minimum 50% of overlapping, while removing the release liner.
Warm the end part of the tape and press down firmly. Using a torch, start at the edge of the tape
and heat circumferentially around the coated pipe.
Finish off by heating over the entire tape vertically to ensure a uniform adhesion and by using a
roller or gloved hands to remove wrinkle and air.
The pipeline heat shrink Coating System designed for Corrosion Protection of straight pipes, fittings, bends, elbows and other irregular configurations. It consists low pre-heat modified bitumen sealant adhesive and thick-wall irradiated cross linked polyolefin. When heated the backing layer shrinks and the adhesive flows and forms a reliable corrosion protection seal onto metal and adjacent coating surfaces. It cons
It installed by wrapping the tape on the pipe joints ,fittings ,bends ,elbows etc .After the shrinking of the tape ,the closure patch should be installed onto the overlap of the tape.
Hear Shrink Sleeve
It installed by sliding the coat from a free end of the pipes, fittings ,bends ,elbows etc onto the area be coated.
Epoxy Primer
It is a specially formulated 100% volume solid (solvent less) high temperature two component epoxy.
It is designed for sealing damaged heat shrink coatings.
Company information:
Jining Xunda Pipe Coating Material Co., Ltd. is the largest manufacturer of anti-corrosion coating materials in China.
We are a global company supplying Polyethylene Coating Systems for anti-corrosion in the oil, gas and water pipeline construction industry for both onshore and
offshore applications.
We are a manufacturer of standard and special products. With high-quality anti-corrosion systems, we are providing anti-corrosion solutions for oil pipelines, natural gas, chemicals and water transmission and distribution pipelines. We are a global supplier of PE corrosion systems for metallic pipelines.
We serve:
Oil, gas and water transmission pipeline markets
Oil and gas distribution and utility markets
New pipeline construction markets
Rehabilitation and reconditioning markets
Offshore industry
Refinery and petrochemical plant industry
We manufacture polyethylene coating by utilizing butyl based elastomeric adhesives, Polyethylene
films and liquid adhesives for corrosion protection of steel pipes.
1. What is the payment terms.
T/T (Telegraphic Transfer) , L/C at sight,Western Union
2. What is the delivery time of the tape.
Usually , 7 days after payment, but it will cost more time when a large order made.
3. Whether the sample is free or not.
The sample will be free with one patch or a small roll . It should paid when you ask for large quantity samples.
4.What is your qualification.
We are the manufacturer of anticorrosion tape for 18 years. All our products are ISO,DVGW, SGS,AWWA approved.we are the membership supplier of SINOPEC, CNOOC ,CNPC. Our products had exported to more than 80 countries.
5. What is your after-sales service.
1). Quality reponse
2). Providing technical proposanl and feld application training
3).Product replacement if it is the quality problem.
Want to know more details, please contact us:
Contact :Nancy Song
Skype:nancysong7
whatsapp:008613791713064
008618853777565
wechat(QQ):438391083
Contact us if you need more details on Heat Shrink Sleeve Tape. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Underground Pipe Wrap Tape、Anticorrosion Pipe Tape . If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Heat Shrinkable Pipe Coating > Heat Shrinkable Tape
Premium Related Products