Product Description
Xunda brand 25mils pvc Marine Tape
Outer Wrapping Tape
The XUNDAT200 series is Cold applied tape coating system for corrosion protection of Oil, Gas, Petrochemical, and Waste Water underground or overhead pipelines. The outerlayer tape backing shall be compounded so that it will be resistance to outdoor weathering.
The outer-layer tape shall be applied after the inner-layer tape by hand or with a wrapping machine
Corrosion protection tape for metal pipeline is polyethylene cold applied tape coating system for corrosion protection of Oil, Gas, Petrochemical, and Waste Water underground or overhead pipelines.
Usage and Features:
1. Widely used on underground and overhead pipelines anticorrosion protection system.
2. Excellent adhesion to pipe and self
3. Resistant to UV
4. Can be applied over a wide temperature range from-30°C to 80°C
5. Good conformability and consistent uniform thickness
6. Cold applied ,and easily applied with no special equipment
7. Compatible with common pipe coatings
8. Excellent resistance to cathodic disbonding
9. Meets ASTM D 1000 Standard
10. Long term corrosion protection and mechanical resistance
The tape consists of two layers, Adhesive and film
Inner layer: butyl rubber
Outer layer: polyethylene
Thickness: 0.35 - 1.30mm
Width: 50-300mm
Length: 30 - 200m
Features & Benefits
Provides a permanent bond to the primed steel pipes surface and provides protection against chemical electrolytic corrosion for underground pipelines.
long term corrosion protection
Worldwide reference lists. Established in-ground history
High chemical resistance under service temperature.
Outstanding electric property and permanent adhesion.
Cold applied, No release liner. Makes installation fast and easy.
Complies with EN-DIN30672 and AWWAC-214 international standards and also ASTM standards.
Physical Properties
INNER WRAP TAPE: XUNDA-T200 Series
Technical Data Sheet:
Technical Data Sheet
Type | T238-15 | T250-20 | T265-25 | T275-30 |
Total thickness | 0.381mm | 0.510mm | 0.650mm | 0.770mm |
Polyethylene Film | 0.251mm | 0.380mm | 0.510mm | 0.620mm |
Butyl Rubber Adhesive | 0.130mm | 0.130mm | 0.140mm | 0.150mm |
Elongation at break | 550% | 587% | 605% | 620% |
Tensile Strength | 56.3 N/cm | 68.8 N/cm | 72.2 N/cm | 75.0 N/cm |
Yield Strength | 35.2 N/cm | 43.0 N/cm | 45.0 N/cm | 50.0 N/cm |
Adhesion to backing at | 5.0 N/cm | 5.0 N/cm | 5.0 N/cm | 5.1 N/cm |
Dielectric Strength | 34.0 KV | 36.0 KV | 38.5KV | 40.0 KV |
Impact resistance | ≥5.5 N•m | |||
Cathodic Disbondment | 6.4mm | |||
Volume Resistivity | ≥2.3X1015 ohm.m | |||
Water Vapor Transmission r ate | ≤0.08 g/m2/24h | |||
Water Absorption Rate | ≤0.05% | |||
Application Temperature, Max Serve Temperature | -34 ºC to +85 ºC, +85 ºC | |||
Color | White ,Black, yellow or other | |||
Available Roll Size(width * length) | 50 to 750mm X 15 to 240 m |
Test Data Sheet:
Physical Properties | Test Method | Typical Value | |
English | Metric | ||
Total thickness | ASTM D 1000 | 25 mils | 0.640mm |
Backing thickness | ASTM D 1000 | 20 mils | 0.510mm |
Adhesi Adhesive thickness | ASTM D 1000 | 5 mils | 0.130mm |
Width | - | 9" | 228mm |
Length | - | 800' | 244m |
Backing color | - | White | White |
Tensile strength | ASTM D 1000 | 41.23 lbs/in | 72.2N/cm |
Elongation | ASTM D 1000 | 605% | 605% |
Adhesion to backing at | ASTM D 1000 | 45.7 oz/in | 5.0N/cm |
Cathodic Disbondment | ASTM G 8 | 0.252 in radius | 6.4mm |
Dielectric Strength | ASTM D 149 | 38.0 KV | 38.0 KV |
Impact resistance | ASTM G 14 | 50 in-lbs | 5.5 N•m |
Volume Resistivity | ASTM D 257 | 2.5×1015 ohm.cm | 2.5×1015 ohm.cm |
Water Absorptivity | ASTM D 570 | 0.05% | 0.05% |
Water Vapor Transmissioin Rate 24 h | ASTM F 1249 | 0.005 g/100sq in/24h | 0.075 g/ m2.24h |
Application Temperature | - | -29ºF to 185 ºF | -34 ºC to +85 ºC |
Max Service Temperature | - | 185ºF | +85 ºC |
Application
1 Rust Removal
Steel Surface needs treating. Its quality shall reach Sa2 or St3 grade as prescribed in GB8923-88 Pre-paint Steel Surface Rust Grade and Rust-removal Grade, and it shall be dust-free.
2 Priming
Primer shall be stirred well before painting. An even film of primer is painted on the steel surface that is rust-removed completely and dust-free. After the primer dries up (one may feel no sticky). The steel pipe can be wrapping with tape (it usually takes 3 to 5 minutes). The primer dosage usually amounts to 80 to 100g / m².
3 Inner Tape (Anti corrosion Tape) & Outer Tape (Protection Tape) Wrapping
The steel pipe that is painted with primer is wrapping with tape by means of suitable devices or tools as per joint needs, and wraps the inner tape and then wraps the outer tape. Tape tensibility can be 10 to 20 N / cm. The overlapped length between beginning and end of an adhesive tape shall be no less than 1/4 circumference of the steel pipe and the total length of adhesive tape shall be no less than 100mm. each film shall be paralleled, and must not be twisted and rumpled.
Certificate
TRADE TERMS:
1 Payment: 30% T/T DEPOSIT PAYMENT IN ADVANCE, BALANCE AGAINST COPY OF B/L, WESTERN UNION, ESCROW, L/C.
2 Production Lead Time: 10 - 15 DAYS AFTER DEPOSIT PAYMENT.
3 Shipping Methods: OCEAN FREIGHT / AIR FLIGHT /COURIER PRESS
4 FOB Shipping port: QINGDAO, SHANGHAI ,OTHER PORTS, MAINLAND CHINA.
5 If you want to deal with EXW/CIF/CNF term instead of FOB, please specify. Otherwise, FOB price will be quoted under inquiry.
OUR SERVICE:
- Your inquiry related to our product & price will be replied within 24hours.
- Well-trained & experienced staffs are to answer all your inquiries in English of course.
- Working time: 8:30am - 6:00pm, Monday to Saturday (UTC+8).
- OEM & ODM projects are highly welcomed. We have strong R&D team here to help.
- Your business relationship with us will be confidential to any third party.
- Good after-sale service offered, please get back if you got question.
Transportation and Storage
1) Keep it away from insolation, rain, or pressing.
2) If it has been stored or transported in the temperature below 5degree, it has to be put in the place at about 20degree for 48hours before it is installed.
3) The storage time is 12 months. It should be kept in a cool place at5~30degree, <75degree, away from heat or open fire.
Contact us if you need more details on Single Side Bitumen Tape 25mils Pvc Marine Tape. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Silicone Adhesive Tape、Self Adhesive Fabric Tape. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Marine Anti-corrosion Tape