Polyethylene butyl rubber tape for steel pipe same with Polyken tape
Product Description
Polyethylene Butyl Rubber Tape for steel pipe same with Polyken Tape
I. Description:
Pipeline Inner Anti-Corrosion Tape is Cold applied tape Coating System for Corrosion Protection of Oil, Gas, Petrochemical, and Waste Water underground or overhead pipelines.
The inner-layer tape shall be applied after the primer and before the outer-layer tape by hand or with a Wrapping Machine
II.Structure
The specification of the tape consists of two layers, Adhesive layer and film backing
Adhesive: butyl rubber
Outer layer: Special blend of stabilized polyethylene
III .Features
Excellent adhesion to pipe and self
Can be applied over a wide temperature range
Good conformability and consistent uniform thickness
Easily applied with no special equipment
Compatible with common pipe coatings
Excellent resistance to cathodic disbonding
Meets ASTM D 1000 ,EN 12068, AWWA C214,C209 and other international standard
Cold applied
IV. Physical Properties:
Type | T-150 | T-165 | T-180 |
Total thickness (mm) | 0.51 | 0.65 | 0.75 |
Polyethylene Film (mm) | 0.31 | 0.37 | 0.41 |
Synthetic Adhesive (mm) | 0.20 | 0.28 | 0.34 |
Elongation | ≥400% | ||
Tensile Strength (N/cm) | 55 | 60 | 63 |
Peel Adhesion to Primed Pipe (N/cm) | 25 | 30 | 33 |
Dielectric Strength(KV) | 35 | 45.8 | 48 |
Cathodic Disbondment | 0.24 in radius 6.4 mm | ||
Volume Resistivity | 2.5×1012ohm.m | ||
Water Vapor Transmission Rate | ≤0.1gm/m²/24h | ||
Water Absorption Rate | <0.06% | ||
Application Temperature | -10°c to 60°c | ||
Max Serve Temperature | -40°c to 80°c | ||
Color | Black | ||
Available Roll Size (width×length) | 2” to 36” ×50 to 900mm | ||
Available Roll Length | 10-300m |
Packaging :
Commonly use carton:
Tape Thickness | Tape Size | Carton Size | SQM/CTN(m²) | Quantity/CTN |
0.51mm | 0.51mm*200mm*50m | 410cm*210cm*415cm | 40 | 4 |
0.51mm*150mm*50m | 420cm*420cm*320cm | 60 | 8 | |
0.51mm*100mm*50m | 420cm*420cm*320cm | 60 | 12 | |
0.51mm*75mm*50m | 420cm*420cm*320cm | 60 | 16 | |
0.51mm*50mm*50m | 420cm*420cm*320cm | 60 | 24 | |
0.75mm | 0.75mm*200mm*50m | 410cm*210cm*415cm | 28 | 4 |
0.75mm*150mm*50m | 420cm*420cm*320cm | 42 | 8 | |
0.75mm*100mm*50m | 420cm*420cm*320cm | 42 | 12 | |
0.75mm*75mm*50m | 420cm*420cm*320cm | 42 | 16 | |
0.75mm*50mm*50m | 420cm*420cm*320cm | 42 | 24 |
Shipping :
Container Specification :
Container Specification | Length*Width*High(m) | Weight (Ton) | Volume (m²) |
20GP | Inside: 5.898×2.352×2.385 Outside: 6.058×2.438×2.591 | 17.5 | 24-26 |
40GP | Inside: 12.032×2.352×2.385 Outside: 12.192×2.438×2.591 | 22 | 54 |
40HQ | Inside: 12.032×2.352×2.385 Outside: 12.192×2.438×2.591 | 22 | 68 |
45HQ | Inside : 13.556×2.352×2.698 Outside: 13.716×2.438×2.896 | 29 | 78 |
Copy to browser:
Jining Xunda Pipe Coating Materials Co.,Ltd , a joint -stock enterprise, possessing a gross investment RMB 42 million, registered capital of RMB 20 million,the manufacturer of anti-corrosion and waterproof coating materials for petrochemical,Oil,Gas and Water underground, underwater and overhead pipelines transport system, are widely used for electricity, chemicals, construction.
Our main anti-corrosion products : Polyethylene Self Adhesive Tape, Polyethylene Outer Protection Tape, Polyethylene Joint Repair Tape, Polyethylene Double Side Wrap Tape, Polypropylene Mesh Membrane Tape, Polypropylene Waterproof Tape, Aluminum Foil Waterproof Tape, Viscoelastic Body Adhesive Tape, Heat Shrinkable Tape, Heat Shrinkable Sleeve ,Petrolatum Tape etc.
We have got DVGW,AWWA,ASTM,SGS certificates and test report, also the sole factory in China passed DVGW, AWWA test. We were approved ISO 9001,ISO 14001 and OHSAS 18001. XUNDA tapes can meet ASTM D1000, DIN EN12068, 30672,AWWA C209, 214 , IGS and other international standards.
Our major market including 80 countries, widely distributed in South Asia,Southeast Asia, the Middle East, Africa, Central Asia, West Asia, Europe, Eastern Europe, South America, Australia.
Company overview
Our Pipe Wrap Tape certificate:
1. ISO 9001
2. OHSAS 18001
3. ISO 14001
4. SGS
5. DVGW
6. EXVOA - AWWA C214
7. SINOPEC : China Petro-Chemical Corporation Supplier
8. CNPC: China National Petroleum Corporation Supplier
9. CNOOC : China National Offshore Oil Corporation Supplier
- 15 years of pipeline coating experience
- Global presence in oil, gas and water industries
- Innovative coatings, high temperature systems and niche coatings with first quality products
- Multiple coating systems to meet end-user applications and requirements
- ISO,AWWA,DVGW,SGS approved manufacturing protocol
- Technology/R&D programs for new products and new processes
- Proven long-term performance and corrosion protection on operating pipelines
- Easy of application, consistent application and lower costs
- Compatible with traditional and current corrosion coatings
- Just-in-Time delivery on a global basis
- Achieving and exceeding Client requirements for products, packaging and shipment expectations
- Meetings all International and In-Country transportation requirements
1) Steel pipe pretreatment
1.1 Keeping the pipe external surface clean and dry. Remove the dust,
oil, welding slag, burrs, grease and dirt on pipe surface.
1.2 Pipe surface prepared up-to a level of Sa 2 or 2 ½ or St 2/st by sand blasting.
1.3 After the pre-cleaning operations, the pipe surface not smooth
which may sharp the pipe coating should be burnished , the abrasive
dust attached on the pipe surface should also be cleaned clearly.
1.4 If flash rusting occurs, the surfaces must be re-cleaned by blasting as above.
2) Coating &Wrapping application
2.1 Coating &wrapping application consist of primer application, inner
tape coating ,outer tape coating .
2.2 weather condition
2.2.1 When the wind&sand was strongly, when the sand and dust covered
on the surface of pipe, primer ,tape etc., should not be brushing primer
and wrapping the tape if there is no reliable preventive measures.
2.2.2 When air humidity is greater than 80%,or when the pipe surface is wet from any precipitation, should not be brushing primer and wrapping tape.
3) Brushing primer
3.1 The brushing time should be control within 6 hours between the pipe surface treatment and brush primer. During brush primer, pipe surface should be free from damp and pollution. If the pipe surface rust return, should be re-pre-cleaned.
3.2 The primer should be mixed evenly in the container before brushing.
3.3 The primer should be applied uniformly, without any sags, floods, runs, drips, bare spot and over spray, such as leakage brush, clot, streaming. The primer coat DFT shall not be less than 25-50micron (1-2mils)
3.4 After the primer dried, then wrapping the tape(It usually takes 3to 5 minutes.).
3.5 Consumption:
machine applicationapprox. 0,1 litre/m²
hand applicationapprox. 0,2 litre/m²
4) Wrap tape application
4.1 Wrap tape application consists of hand application and machine application.
4.2 The tape applied temperature must be above 5 degrees,the coating construction temperature shall be more than -5 degrees as better .
4.3 The tape shall be spirally applied ,minimum overlap shall not be less than 50%.
4.4 When a new roll of tape started ,the ends shall be located to ensure the continuity of wrap tape using the same method of application.
4.5 Outer tape applied method is the same as above.
5.Cutbacks
Cutbacks shall be a minimum 6inches(150mm) from the ends of each
pipe.The cutbacks may be tapered or straight edge for the total thickness
of the coating.
1. What is the payment terms.
T/T (Telegraphic Transfer) , L/C at sight,Western Union
2. What is the delivery time of the tape.
Usually , 7 days after payment, but it will cost more time when a large order made.
3. Whether the sample is free or not.
The sample will be free with one patch or a small roll . It should paid when you ask for large quantity samples.
4.What is your qualification.
We are the manufacturer of anticorrosion tape for 18 years. All our products are ISO,DVGW, SGS,
AWWA approved.we are the membership supplier of SINOPEC, CNOOC ,CNPC. Our products had
exported to more than 80 countries.
5. What is your after-sales service.
1). Quality reponse
2). Providing technical proposanl and feld application training
3).Product replacement if it is the quality problem.
Product Categories : Butyl Rubber Pipe Coating > Pipe Anti-corrosion Tape
Premium Related Products