15mil Anticorrosion Inner Wrap Tape
Basic Info
Model No.: GF100
Product Description
Description
Why Inner Wrap Tape? The Inner Wrap Tape is a cotton cloth tape with rubber Adhesive that is water and
abrasion-resistant. It is superior to most other tapes like Duct Tape. Inner Wrap Tape has following
characteristics:strong adhesive: Anticorrosion Inner Wrap Tape is oil pipeline,gas pipeline and other
professionals mainly.
Product Properties | Test method | Typical Value | |||
POLYKEN955-15 | POLYKEN955-20 | POLYKEN955-25 | POLYKEN955-30 | ||
Total Thickness |
| 15mil(0.381mm) | 20mil(0.508mm) | 25mil(0.635mm) | 30mil(0.762mm) |
Backing of PE film |
| 10mils(0.254 mm) | 15mil(0.381mm) | 20mil(0.508mm) | 25mil(0.635mm) |
Butyl Rubber Adhesive |
| 5 mils(0.127 mm) | 5mil(0.127mm) | 5mil(0.127mm) | 5mil(0.127mm) |
Tensile Strength | ASTM D1000 | 50N/cm | 60N/cm | 70 N/cm | 80 N/cm |
Elongation | ASTM D1000 | 300% | 350% | 350% | 450% |
Peel Adhesion to Primed Steel | ASTM D1000 | 24 N/cm | 25 N/cm | 26.5 N/cm | 33 N/cm |
Water Vapor Transmission Rate | ASTM E 96 | 0.10g/m2 | 0.10g/m2 | 0.08g/m2 | 0.06g/m2 |
Water absorption after 1 day,At+23℃ | ASTM D570 | 0.10% | 0.10% | 0. 08% | 0. 06% |
Volume Resistivity | ASTM D 257 | 2.0 x 1015 ohm.cm | 2.5 x 1015 ohm.cm | 2.6 x 1015 ohm.cm | 2.6 x 1015 ohm.cm |
Dielectric Strength | ASTM D149 | 30 kv | 36 kv | 43 kV | 45 kV |
Backing : Special blend of stabilized polyethylene
Adhesive : Butyl rubber and Adhesion Promoting Resins
Total tape thickness in mils:15mils(0.381mm),20mils(0.508mm),25mils(0.635mm),30mils(0.762mm)
Tape width in inches:2"(50mm),4"(100mm),6"(150mm),9"(228mm),12"(305mm)18" (457mm)
Tape roll length in feet:100ft(30M),200ft(61M),400ft(122M),600ft(183M),800ft(244M)
Proudction Image
Cold Wrap Tape including Inner Wrap Tape,Outer Wrap Tape,Joint Wrap Tape,Adhesive Primer.
Other Product Recommend
Outer Wrap Tape,Polypropylene Anti-Corrosion Tape,Petrolatum Tape.
Product Categories : Pipe Anticorrosion Materials > Pipe Inner Wrapping Tape