Black pipe wrap tape for the underground pipeline anticorrosion
Product Description
Black Pipe Wrap Tape for the underground pipeline anticorrosion
I. Description:
Black Pipe Wrap tape is Cold applied tape Coating System for Corrosion Protection of Oil, Gas, Petrochemical, and Waste Water underground or overhead pipelines.
Black pipe wrap tape shall be applied after the primer and beforethe outer-layer pipe wrap tape by hand or with a Wrapping Machine
II.Structure
The specification of the Black pipe wrap tape consists of two layers, Adhesive layer and film backing
Adhesive: butyl rubber
Outer layer: Special blend of stabilized polyethylene or PVC
III .Features
Excellent adhesion to pipe and self
Can be applied over a wide temperature range
Good conformability and consistent uniform thickness
Easily applied with no special equipment
Compatible with common pipe coatings
Excellent resistance to cathodic disbonding
Meets ASTM D 1000 ,EN 12068, AWWA C214,C209,SGS and other international standard
Cold applied
IV. Physical Properties:
Black pipe wrap tape
| Physical Properties | Unit | DATA | Test Method | ||
| T-151 | T-165 | T-175 | |||
| Color | / | Black , White ,Yellow etc | / | ||
| Thickness Backing Adhesive Total | mm |
0.25 0.26 0.51
|
0.31 0.34 0.65
| 0.33 0.43 0.76 | ASTM D1000 |
| Length | m | 0 - 500 | ASTM D1000 | ||
| Width | mm | 50- 900 | ASTM D1000 | ||
| Core Size | mm I.D. | 76 | / | ||
| Weight | kg/m2 | 0.612 | 0.768 | 0.912 | / |
| Tensile Strength | N/cm | 50 | 53 | 55 | ASTM D1000 |
| Elongation at Break | % | >400 | ASTM D1000 | ||
| Peel Adhesion To primed pipe | N/cm | >25 | >30 | >33 | ASTM D1000 |
| Cathodic Disbondment | mm | 0.24 in radius 6.4 | ASTM G8 | ||
| Dielectric Strength | kv | >23 | >25 | > 28 | ASTM D149 |
| Volume Resistivity | ohm.cm | >2.5×1012 | ASTM E257 | ||
| Water Vapor Transmission Rate | g/m2/24h | <0.05 | ASTM F1249 | ||
| Water Absorptivity | % | <0.1 | ASTM D570 | ||
| Imapct Resistance | Nm | >4.7 | >5.0 | > 5.5 | ASTM G14 |
| Temperature Range For Application For Service | ℃ | 5℃ - 60℃ -30℃ - 80℃ | / | ||
| RECOMMENDED Primer | Xunda Primer P27 | ||||
 |  |
| Pipeline Anti-Corrosion Tape | Mechanical Protection Tape |
 |  |
| Polyethylene Bitumen Tape | Viscoelastic Tape |
1. What is the payment terms.
T/T (Telegraphic Transfer) , L/C at sight,Western Union
2. What is the delivery time of the tape.
Usually , 7 days after payment, but it will cost more time when a large order made.
3. Whether the sample is free or not.
The sample will be free with one patch or a small roll . It should paid when you ask for large quantity samples.
4.What is your qualification.
We are the manufacturer of anti-corrosion tape for 18 years. All our products are ISO,DVGW, SGS,
AWWA approved.we are the membership supplier of SINOPEC, CNOOC ,CNPC. Our products had
exported to more than 80 countries.
5. What is your after-sales service.
1). Quality response
2). Providing technical proposal and field application training
3).Product replacement if it is the quality problem.
| Tel | 0086 15753761575 |
| 0086 15753761575 | |
 | |
| Website |
|
| zxm_kevin | |
| Skype | zhanxuemeng |
Packaging :
Exporting Carton Box:
| Tape Thickness | Tape Size | Carton Size | SQM/CTN(m²) | Quantity/CTN |
| 0.51mm | 0.51mm*200mm*50m | 410cm*210cm*415cm | 40 | 4 |
| 0.51mm*150mm*50m | 420cm*420cm*320cm | 60 | 8 | |
| 0.51mm*100mm*50m | 420cm*420cm*320cm | 60 | 12 | |
| 0.51mm*75mm*50m | 420cm*420cm*320cm | 60 | 16 | |
| 0.51mm*50mm*50m | 420cm*420cm*320cm | 60 | 24 | |
| 0.75mm | 0.75mm*200mm*50m | 410cm*210cm*415cm | 28 | 4 |
| 0.75mm*150mm*50m | 420cm*420cm*320cm | 42 | 8 | |
| 0.75mm*100mm*50m | 420cm*420cm*320cm | 42 | 12 | |
| 0.75mm*75mm*50m | 420cm*420cm*320cm | 42 | 16 | |
| 0.75mm*50mm*50m | 420cm*420cm*320cm | 42 | 24 |
Shipping :
Container Specification :
| Container Specification | Length*Width*High(m) | Weight (Ton) |
| 20GP | Inside: 5.898×2.352×2.385 Outside: 6.058×2.438×2.591 | 16 |
| 40GP | Inside: 12.032×2.352×2.385 Outside: 12.192×2.438×2.591 | 22 |
Copy to browser:
Jining Xunda Pipe Coating Materials Co.,Ltd , a joint -stock enterprise, possessing a gross investment RMB 42 million, registered capital of RMB 20 million,the manufacturer of anti-corrosion and waterproof coating materials for petrochemical,Oil,Gas and Water underground, underwater and overhead pipelines transport system, are widely used for electricity, chemicals, construction.
Our main anti-corrosion products : Polyethylene Self Adhesive Tape, Polyethylene Outer Protection Tape, Polyethylene Joint Repair Tape, Polyethylene Double Side Wrap Tape, Polypropylene Mesh Membrane Tape, Polypropylene Waterproof Tape, Aluminum Foil Waterproof Tape, Viscoelastic Body Adhesive Tape, Heat Shrinkable Tape, Heat Shrinkable Sleeve ,Petrolatum Tape etc.
We have got DVGW,AWWA,ASTM,SGS certificates and test report, also the sole factory in China passed DVGW, AWWA test. We were approved ISO 9001,ISO 14001 and OHSAS 18001. XUNDA tapes can meet ASTM D1000, DIN EN12068, 30672,AWWA C209, 214 , IGS and other international standards.
Our major market including 80 countries, widely distributed in South Asia,Southeast Asia, the Middle East, Africa, Central Asia, West Asia, Europe, Eastern Europe, South America, Australia.
Company overview
- OEM, OBM, ODM
- Oil, Gas and Water Transmission pipeline market
- Oil and Gas distribution and utility markets
- New pipeline construction markets
- Rehabilitation and Reconditioning market
- Offshore Industry
- Manufacture of conventional and specialty Polyethylene, Polypropylene and Polymeric Alloys and coating
systems for pipe corrosion protection.
- Manufactures PE coatings systems for applications for New Pipe Construction and Rehabilitation and
Reconditioning
- Approved to ISO 9001 and to other good manufacturing and technical standards and norms governed within the energy and pipeline industry.
- 15 years of pipeline coating experience
- Global presence in oil, gas and water industries
- Innovative coatings, high temperature systems and niche coatings with first quality products
- Multiple coating systems to meet end-user applications and requirements
- ISO,AWWA,DVGW,SGS approved manufacturing protocol
- Technology/R&D programs for new products and new processes
- Proven long-term performance and corrosion protection on operating pipelines
- Easy of application, consistent application and lower costs
- Compatible with traditional and current corrosion coatings
- Achieving and exceeding Client requirements for products, packaging and shipment expectations
- Meetings all International and In-Country transportation requirements
Our pipe wrap tape certificate:
1. ISO 9001
2. OHSAS 18001
3. ISO 14001
4. SGS
5. DVGW
6. EXVOA - AWWA C214
7. SINOPEC : China Petro-Chemical Corporation Supplier
8. CNPC: China National Petroleum Corporation Supplier
9. CNOOC : China National Offshore Oil Corporation Supplier
Product Categories : Anticorrosion Inner Wrap Tapes
