Pipeline flanges insulation tape similar to denso tape
Product Description
Pipeline flanges insulation tape similar to denso tape
1.T100 Pipe wrap Inner layer tape
Inner wrap tape also called pipe wrap anti-corrosion tape, polyethylene wrap tape.
Inner wrap tapeT100 is engineered to assure a high bond to the primed pipe surface with excellent conformability characteristics, aggressive Adhesive for corrosion protection and repair of main line coatings.
Inner wrap tapeT100 series is Cold applied tape coating system for corrosion protection of Oil, Gas, Petrochemical, and Waste Water pipelines, pipe can be buried, underground ,overhead ,onshore and offshore .
2.T200 Outer-layer tape
Outer wrap tape also called outer layer protection tape, pipe wrap tape, polyethylene adhesive tape.
Outer wrap tape T200 is engineered to achieve a complete bond to the inner layer tape, providing maximum handling and in-service protection for the coating system.
Outer wrap tape T200 series is Cold applied tape coating system for corrosion protection of Oil, Gas, Petrochemical, and Waste Water pipeline. Pipe can be buried, underground, overhead, onshore and offshore.
3.T 600 Bituminous joint wrap tape [Cold/hot applied]
T600 Bituminous tape anticorrosion tape series is designed for corrosion protection of straight pipes, fittings, flanges valves, bends, elbows, carbon steel pipes and other irregular configurations also be called heat shrink tape.
T600 Bituminous tape made of a stabilized polyethylene/PVC carrier film, coated on one sides with a permanently plastic synthetic compound on bitumen base.
Bituminous anti-corrosion tape
The specifications can be decided by your requirement. More information about each type, please find in the product description.
Pipe wrap tape System description:
Inner wrap tape also be called pipe wrap anti-corrosion tape, polyethylene wrap tape.
Inner wrap tapeT100 is engineered to assure a high bond to the primed pipe surface with excellent conformability characteristics, aggressive adhesive for corrosion protection and repair of main line coatings.
Inner wrap tapeT100 series is Cold applied tape coating system for corrosion protection of Oil, Gas, Petrochemical, and Waste Water pipelines, pipe can be buried, underground ,overhead ,onshore and offshore .
Structure:
The specification of the tape consists of two layers, adhesive layer and film backing.
Adhesive: Butyl rubber
Film backing: Special blend of stabilized polyethylene
Features & Benefits
Provides a permanent bond to the primed steel pipes surface and provides protection against chemical electrolytic corrosion for underground pipelines.
long term corrosion protection
Worldwide reference lists. Established in-ground history
High chemical resistance under service temperature.
Outstanding electric property and permanent adhesion.
Cold applied, No release liner. Makes installation fast and easy.
Complies with EN-DIN30672 and AWWAC-214 international standards and also ASTM standards.
Physical Properties
INNER WRAP TAPE: XUNDA-T100 Series
Technical Data Sheet:
Type | T138-15 | T145-18 | T150-20 | T165-25 | T175-30 |
Total thickness | 0.390mm | 0.460mm | 0.510mm | 0.650mm | 0.770mm |
Polyethylene Film | 0.230mm | 0.250mm | 0.300mm | 0.340mm | 0.420mm |
Butyl Rubber Adhesive | 0.160mm | 0.210mm | 0.210mm | 0.310mm | 0.350mm |
Elongation at break | 410% | 420% | 560% | 567% | 570% |
Tensile Strength | 54.0N/cm | 55.0N/cm | 61.5 N/cm | 64.5N/cm | 68.0N/cm |
Yield Strength | 36.0N/cm | 36.6N/cm | 40.5 N/cm | 43.0N/cm | 45.3N/cm |
Peel Adhesion to Primed Pipe | 23.0N/cm | 26.0N/cm | 26 .0N/cm | 34.0N/cm | 35.0N/cm |
Adhesion to backing at | 5.1 N/cm | 5.2N/cm | 5.2N/cm | 5.4N/cm | 5.4 N /cm |
Dielectric Strength | 23.0 KV | 25.0 KV | 25.5 KV | 27.0 KV | 29.0 KV |
Cathodic Disbondment | 6.4mm | ||||
Volume Resistivity | ≥2.2X1015ohm.cm | ||||
Water Vapor Transmission rate | ≤0.15g/m2/24h | ||||
Water Absorption Rate | ≤0.06% | ||||
Application Temperature | -34 ºC to +85 ºC | ||||
Max Serve Temperature | +85 ºC | ||||
Available RollSize(width* length) | 50 to 750mm X 15 to 240 m | ||||
Color | Black |
Test Data Sheet:
Physical Properties | Test Method | Typical Value | |
English | Metric | ||
Total thickness | ASTM D 1000 | 25 mils | 0.635mm |
Backing thickness | ASTM D 1000 | 13 mils | 0.330mm |
Adhesive thickness | ASTM D 1000 | 12 mils | 0.305mm |
Width | - | 9" | 228mm |
Length | - | 600' | 183m |
Backing color | - | Black, | Black |
Tensile strength | ASTM D 1000 | 36.3 lbs/in | 64.5 N/cm |
Elongation | ASTM D 1000 | 562% | 562% |
Peel Adhesion to primed steel pipe | ASTM D 1000 | 311oz/in | 34 N/cm |
Cathodic Disbondment | ASTM G 8 | 0.252 in radius | 6.4mm |
Dielectric Strength | ASTM D 149 | 27.0 KV | 27.0 KV |
Volume Resistivity | ASTM D 257 | 2.4×1015 ohm.cm | 2.4×1015 ohm.cm |
Water Absorptivity | ASTM D 570 | 0.06% | 0.06% |
WaterVaporTransmissioinRate24 h | ASTM F 1249 | 0. 083 g/100sq in/24hr | 0.13 g/ m2.24h |
Application Temperature | - | -29ºF to 185 ºF | -34ºC to +85 ºC |
Max Service Temperature | - | 185ºF | +85 ºC |
Pipeline Anti-Corrosion Tape | Mechanical Protection Tape |
Polyethylene Bitumen Tape | Viscoelastic Tape |
Application
1 Rust Removal
Steel Surface needs treating. Its quality shall reach Sa2 or St3 grade as prescribed in GB8923-88 Pre-paint Steel Surface Rust Grade and Rust-removal Grade, and it shall be dust-free.
2 Priming
Primer shall be stirred well before painting. An even film of primer is painted on the steel surface that is rust-removed completely and dust-free. After the primer dries up (one may feel no sticky). The steel pipe can be wrapping with tape (it usually takes 3 to 5 minutes). The primer dosage usually amounts to 80 to 100g / m².
3 Inner Tape (Anti corrosion Tape) & Outer Tape (Protection Tape) Wrapping
The steel pipe that is painted with primer is wrapping with tape by means of suitable devices or tools as per joint needs, and wraps the inner tape and then wraps the outer tape. Tape tensibility can be 10 to 20 N / cm. The overlapped length between beginning and end of an adhesive tape shall be no less than 1/4 circumference of the steel pipe and the total length of adhesive tape shall be no less than 100mm. each film shall be paralleled, and must not be twisted and rumpled.
TRADE TERMS:
1 Payment: 30% T/T DEPOSIT PAYMENT IN ADVANCE, BALANCE AGAINST COPY OF B/L, WESTERN UNION, ESCROW, L/C.
2 Production Lead Time: 10 - 15 DAYS AFTER DEPOSIT PAYMENT.
3 Shipping Methods: OCEAN FREIGHT / AIR FLIGHT /COURIER PRESS
4 FOB Shipping port: QINGDAO, SHANGHAI ,OTHER PORTS, MAINLAND CHINA.
5 If you want to deal with EXW/CIF/CNF term instead of FOB, please specify. Otherwise, FOB price will be quoted under inquiry.
OUR SERVICE:
- Your inquiry related to our product & price will be replied within 24hours.
- Well-trained & experienced staffs are to answer all your inquiries in English of course.
- Working time: 8:30am - 6:00pm, Monday to Saturday (UTC+8).
- OEM & ODM projects are highly welcomed. We have strong R&D team here to help.
- Your business relationship with us will be confidential to any third party.
- Good after-sale service offered, please get back if you got question.
Transportation and Storage
1) Keep it away from insolation, rain, or pressing.
2) If it has been stored or transported in the temperature below 5degree, it has to be put in the place at about 20degree for 48hours before it is installed.
3) The storage time is 12 months. It should be kept in a cool place at5~30degree, <75degree, away from heat or open fire.
1. What is the payment terms.
T/T (Telegraphic Transfer) , L/C at sight,Western Union
2. What is the delivery time of the tape.
Usually , 7 days after payment, but it will cost more time when a large order made.
3. Whether the sample is free or not.
The sample will be free with one patch or a small roll . It should paid when you ask for large quantity samples.
4.What is your qualification.
We are the manufacturer of anti-corrosion tape for 18 years. All our products are ISO,DVGW, SGS,
AWWA approved.we are the membership supplier of SINOPEC, CNOOC ,CNPC. Our products had
exported to more than 80 countries.
5. What is your after-sales service.
1). Quality response
2). Providing technical proposal and field application training
3).Product replacement if it is the quality problem.
Tel | 0086 15753761575 |
0086 15753761575 | |
Website |
|
zxm_kevin | |
Skype | zhanxuemeng |
Contact us if you need more details on Similar to Denso Tape. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Flanges Insulation Tape、Pipeline Flanges Insulation Tape. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Butyl Rubber Pipe Coating > Pipe Anti-corrosion Tape
Premium Related Products